Description
Watrex streamline isocratic HPLC system consists of an isocratic with P1 pump, manual injector, CT1 column thermostat, and programmable UV/VIS detector UV1. Optimized pump mechanics with parallel piston design offers excellent flow rate accuracy and precision. Efficient internal pulse damper together with a dynamic mixer ensure high performance gradients. Excellent signal-to-noise ratio of the UV1 designates this detector for even the most demanding applications including microbore and capillary separations. Modular concept of this HPLC system offers easy and economical upgrades or future extensions. The system can be controlled by Clarity datastation.
P1 HPLC pump
Flow Rates 0.001 to 10.000 mL/min, increment 0.001 ml/min
Pressure 0 to 6,000 psi (420 bar)
Pressure Accuracy ±2% of full-scale pressure
Pulsation ±0.5% @ 1 mL/min and 1000 psi
Flow Rate Accuracy ± 1% @ 1 mL/min and 1000 psi, with 80:20 Water/IPA @ 1000psi
Flow Rate Precision 0.1% RSD
Remote Inputs RS-232
UV1 UV detector
Light Source: Deuterium Lamp, Tungsten Lamp
Wavelength Range: 190 – 800 nm
Baseline Noise: 1 x 10-5 AU (@240 nm, 2 sec. Risetime)
Baseline Drift: < 1 x 10-4 AU/h
Wavelength Accuracy: ± 1 nm
Wavelenghth Reproducibility ± 0.1 nm
Linearity: > 2.5 AU
Wavelength Program: Programmable, 10 steps
Analog Output: 1x 1 V
Options: dual channel configuration, thermostated flow cell
CT1 Column thermostat
Temperature range 10 °C above ambient temperature to 120 °C
Temperature accuracy deviation less than 0,5 °C
Temperature stability RSD < 0,4%
Setting and display resolution 0,1 °C
T-compartment dimensions 320 x 50 x 30 mm (L x W x H)
Time to stabilization @ 80 °C 30 minutes maximum, 15 minutes typical