Description

Watrex Streamline™ GPC system is an isocratic HPLC system consisting of one P1 pump, CT1i column thermostat with manual injector and RI1 refractive index detector.

• Optimized pump mechanics of P1 pump with parallel piston design offers excellent flow rate accuracy and low RI signal pulsation.
• The thermal isolated optic with a counter-current heat exchanger and programmable temperature control, results in an extremly stable baseline and an optimal Signal/Noise ratio od RI1
• The system can be upgraded with autosampler and fraction collector, or VD 400 Viscometer Detector.
• Data acquisition, processing and instrument control is done by Clarity Chromatography Station with GPC option or Agilent TriSEC software

 

Component specifications:

P1 HPLC pump: Flow Rates : 0.000 to 10.000 mL/min, Pressure: 0 to 6,000 psi (420 bar), Pressure accuracy   ±2% of full-scale, pulsation: ±0.5% @ 1 mL/min and 1000 psi, Flow accuracy:  ± 2% @ 1 mL/min and 1000 psi, with 80:20 Water/IPA @ 1000psi, Flow precision: 0.2% RSD.

RI1 refractive index detector offers the sensitivity, stability and reproducibility required for optimal RI detection. The thermal isolated optic with a countercurrent heat exchanger and with its programmable temperature control, results in an extremly stable baseline and an optimal Signal/Noise ratio.

RI1 provide autopurge and autozero capabilities, as well as RS232 communication to acquire data directly without using any external signal interface.

CT1 Column thermostat: Temperature range  10 °C above ambient temperature to 120 °C, Temperature  accuracy: ± 0,5 °C, Temperature stability: RSD < 0,4%, Setting and display resolution: 0,1 °C,

T-compartment dimensions  320x50x30mm (LxWxH), T-stabilization @ 80 °C  15min (30min. max).

Clarity™ Chromatography Station: Advanced chromatographic datastation for data acquisition and evaluation supported with GPC module for MWD, Mw, Mn, Mz calculation. Enables rutine separations with pre-set methods, containing all experimental and conditions and data evaluation settings. PC Win 10 Professional with LCD monitor included.

OPTIONAL CONFIGURATIONS:

PN:  ST99-002  Remove CT1i column thermostat with manual injector from system  –2 566.00

 

PN:  SAS90-001  Add AS1 Autosampler to system  +5 700.00

PN:  SFC90-001  Add FC1 Fraction collector to system      +3 675.00